Race Master Holster - Left Hand (LH)

$199.95

Description:
Share

We are very please to offer our LEFT HAND version of the DAA Race Master holster!

The LH version is in no way a "modified RH", but rather a true left hand design. We were able to design this new LH version to utilize the same insert blocks as used in the original RH version and this allows us to offer our LH customer the full range and selection of gun types available to the RH shooters. In fact, the only parts which are custom made for the LH holster are the body of the holster and the tension knob, which now has a new two piece design.

The performance of the LH holster is as good, and possibly even better than the RH one!

In the LH version, the safety level is situated on the outer side, not the inner side of the holster body, thus allowing for an even easier access to it.

The Tension knob works in reverse - it must be screwed all the way IN to achieve the lightest setting - which is how must users will usually use their holster, hence creating a less protruding knob.

The only compromise we had to made, due to small volume, is that the LH holster is available ONLY IN BLACK.

Realizing a Dream!
We are extremely proud to present our new Race Master Competition Holster to the Practical Shooting world. Designed by Saul Kirsch, and with valuable input from Angus Hobdell, more than 30 years of top-level competition experience contributed to its design. After nearly two years in development, we can say with confidence that this is indeed the next stage in competition holster evolution. Try one, and we are sure you will agree!

We set out to develop a new holster with the following goals in mind:
• To offer the best and most advanced release system on the market
• To offer a wide range of position adjustments – and to hold those settings rock solid
• To offer both a fully locked safety feature and tension adjustment capabilities
• To allow the user to change from one gun type to another without having to buy a complete new holster
• To look sharper and cooler than any other race holster out there

We are pleased to say that the final product offers all these features and more.

Looking the Part!
The Race Master Holster is as attractive as it is functional. No expense was spared in the design and construction of this state-of-the-art product. The entire holster is CNC machined from aircraft-grade aluminum and stainless steel and hard anodized to offer a long-lasting surface finish in Black, Blue, Red, or Titanium Grey.

Patent-Pending Locking Mechanism
At the very heart of the new Race Master Holster is a brandnew innovative patent-pending locking system that offers a smooth clean release of the pistol and a solid grip on the gun when holstered.

Unlike other models which rely on a muzzle support to hold the gun steady, or short holsters which allow the gun to rock when holstered, the new Race Master holds the gun so steady, you cannot tell the pistol from the holster! And yet it draws upwards as smoothly as can be with almost no resistance at all.

The phenomenal locking is achieved by means of a unique sliding block, formed precisely around the front end of the trigger guard. This fitting is the reason for the gun’s incredible stability in the holster. As the gun is drawn, the block, which resides in an angled track, slides out to the side, smoothly releasing the trigger guard and allowing the gun to be drawn with only 6-8 mm (1/4”) of upward motion required to clear the holster.

Unlimited Adjustability
One of the most important features of a competition holster is adjustability. Being able to position the gun just right can make the difference between a lightning-fast consistent draw or a poor failed attempt.

The Race Master Holster offers almost unlimited adjustability. And, thanks to its rugged aluminum construction and large-thread screws, when you lock the holster in your chosen position, it stays put!

Unlike other holsters, the Race Master is designed to give you access to almost all the adjustment screws while you are wearing it on your belt. Without removing your belt, you can adjust the height of the gun and the distance from your body, and even unlock the ball-socket hinge and adjust any angle of the holster. This is a huge advantage in setting up your holster just right.

Pistol Retention
Thanks to the patent-pending locking mechanism, the Race Master Holster offers you a secure lock/unlock safety lever as well as a tension adjustment turn-knob. The spring-loaded lock/unlock safety lever is conveniently positioned just below the trigger guard, enabling you to release the lock with an upward flick of your finger as you close your hand around the gun. The spring-loaded lever immediately snaps into place, either locked or unlocked, ensuring secure positioning. The large stainless steel knob rotates several turns, increasing or decreasing the weight of the draw. This gives you a wide range of possibilities, from totally resistant-free for those fast “draw-facing targets” stages to almost completely locked when you want more resistance on the draw.

Advanced Belt Attachment
The Race Master belt-hanger is sleek and modern, showing off the pattern and color of your shooting belt. But it is designed for more than looks alone. The hanger is attached to the belt by means of two spring-steel flat clasps that are screw-tightened on the inside of the shooting belt. This design prevents any separation between the inner and outer belts, ensuring that the Velcro layers firmly hold together at this crucial point. The range of tightening provided by the four screws guarantees that you can tighten and lock the holster rock steady on any 1.5” shooting belt. This design allows you to assemble your holster on your belt at the designated position without struggling to slide a tight-fitting belt-hanger the length of your belt. The lack of any bulk on the inner side makes this hanger more comfortable for extended wear than any other comparable product.

Gun Compatibility While the Race Master Holster is gun-specific, it is designed to enable you to switch from one gun to another without having to buy a complete new holster. All you have to do is change the relatively inexpensive locking-block assembly, available separately. This flexibility is also a great advantage for resellers - they no longer need to stock a range of different models, as they can simply change the locking-block assembly as needed.

Glock customers - read this before using your holster!

Zubehor Magazine - Review. Click here to download.

Weight: 1.50 lb
Manufacturer: Double-Alpha Academy

Current Reviews: 1

Available Options:
Color:
Gun Type:

$199.95

Quantity:

Customers Reviews

Date Added: Sunday 11 September, 2011

Reviewer: Larry Hull

Rating: [5 of 5 Stars!]

Pleased with the Race master Holster. Yours is the only truly left handed one I could find. Very fast shipping. Only thing that I have fault with it the ball joint head. It is so soft that I have trouble getting the set screws to hold properly, and when tight enough to hold securely it leaves a big indention that makes fine tuning a little difficult. The lock lever could be a little larger to ease locking the gun in the holster. Other than that very pleased with the product. Larry Hull